IML Foam

High Tension Strength (IML Foam) which are used on the front face of static loading apparatuses was started to be imported by PULS ELECTRONIC and presented to other users in the sector as well as used by it in its devices. The IML Foam whose general areas of usage are indicated below can work for a long time without creating a problem on the condition that the rules for use are obeyed and necessary physical conditions are provided.

GKA 75 08 Perforation Detector

Puls Perforation Detector, is used to detect the perforation on any material in packaging industry. It is especially used in bag making machinery to count the bag numbers by detecting and reporting the perforation. Its detection capacity is 900 pcs/min. Output voltage can be adjusted between 6kV-21kV by rotating and fixing the knob on the front panel. The leds on the front panel show the high voltage level. If a perforation is detected, the count led flashes. The high voltage bar is connected to the output of the equipment and it is mounted above the web facing an earth potential. If a spark occurs from the high voltage bar to the earth via a perforation, the detector will report it by a 30msn opto coupler pulse output.

DC Charging Bar

Puls charging bars are used in applications in which the materials should be sticked to a place or each other. Many production steps require sticking of components or materials to each other. This sticking should not leave marks and damage surfaces of the products when the materials are seperated. High resistant materials such as paper and plastic can be bonded to conductive surfaces without using glue.

Electrostatic charging which is provided by ionization, is a charger system consists of a charging generator and a charging applier. Charging bars are designed to execute a specific charge. Their needles are resistively connected to high voltage so do not cause sparks and provide a secure operation.

In case of a positive and negative polarity, the voltage of power supply should be adjusted. For static charge applications, charging bar is installed to a distance of 10-20mms. Connection channels placed in the back of charging bars provides an easy and safe installation with the plastic connection apparatus that has dimensions of M8x60. For proper operation, each static charged material should be neutralized with the most appropriate ionization system before they are bonded.

HVDC 2000 Charging Generator

HVDC 2000 Charging Generator is suitablefor high voltage applications in industry and for DC powered bars. The unit output voltage and protection current value are set digitally by using the front panel. The output voltage can be set between 0kV-20kV and current can be set between 0-1000uA. The power supply includes remote on/off and remote voltage andjustment settings and is available as positive or negative.